- ページ 10
テント ClearSpan 1040SSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。ClearSpan 1040SS 18 ページ。 Add-a-bay shade
ページを印刷するCLEARSPAN
SUNBLOCKER SYSTEM
™
FRAME ASSEMBLY (CONTINUED)
6. Review the diagrams in the Quick Start section for your
shelter to determine the locations of the remaining
diagonal struts.
Three (3) struts
attached
Two (2) struts
attached
20'-3" on-center
10'-2 3/4
on-center
Frame length shown may differ from actual frame.
7. Install the diagonal struts. Each corner connection uses
two (2) struts and each mid connections (if present)
uses three (3) struts. Refer to Quick Start Guide for
location and additional details.
Corner Connection
Mid Connection
8. With the struts in position, tighten the band clamps.
9. Once the frame assembly is complete, verify that all
frame bolts are tight, anchor the frame, and install the
cover.
10
Visit www.ClearSpan.com for additional products and customer assistance.
Space below is reserved for customer notes.
20'-3" on-center
Revision date: 10.04.07