- ページ 8

テント ClearSpan 105706のPDF マニュアルをオンラインで閲覧またはダウンロードできます。ClearSpan 105706 19 ページ。 Party tent

CLEARSPAN™ CANOPIES

INSTALL THE MAIN FRAME AND SIDE ROOF COVERS

After assembling the main frame, install the main frame cover.

Gather the parts:

•

Snugger ball tie downs (#CC4595)

•

Main cover and side panels (if equipped)

NOTE: Assistance is required to assemble the shelter.

Locate the main cover, unfold it along the assembled frame, and pull it onto the frame and into position.

WARNING: To prevent property damage

and personal injury, do not install the

cover on a windy or stormy day.

Take the snugger ball tie downs, feed the stretch cord

through a grommet, and attach the main cover to the

assembled frame. See the above insert. Use one

snugger ball for each grommet.

Once the main cover is installed, unfold the side roof

cover along the frame and attach it to the main roof

frame using the snugger balls. The dashed line in the

diagram below shows where to attach the side roof

cover.

After the covers are attached, assemble the side roof

supports and install the main frame legs.

NOTE: Dashed lines show

where to attach the main cover

to the frame.

HELPFUL HINT: After attaching

the side roof cover, fold the cover

onto the main roof cover. This will

help with the installation of the

main frame legs. See the arrows

in the diagram to the left.

Revision date: 07.21.08