- ページ 3

テント ClearSpan 105758のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。ClearSpan 105758 5 ページ。 Frame kit

ページを印刷する
ATTACH EYEBOLT ASSEMBLIES (CONTINUED)
3.
Take one " plain pipe and twist it onto one of the attached eyebolts.
Pipe with
installed
star nut.
Photo may show a slightly different
application.
NOTE: Hand-tighten the pipe until it is snug. Secure shelter material tightly between the washers.
4.
Repeat the steps and attach the remaining frame support pipes.
5.
With all supports attached to the storage bag (or shelter), place the frame pipes in position as shown in the
following photos and anchor the pipes in place using the anchor kits.
Place the lower part of each frame support
on the storage bag to keep the bag in
position.
6.
Consult the anchor kit installation information to properly attach and secure the anchor kit.
ATTENTION: Each Anchor Kit (#03599) contains four (4) individual anchor sets. Depending on the length of
your shelter, you may have anchor sets (ground stakes and ratchet/straps) that are not used.
Assembled Frame Support Pipe
Dashed lines show the positions of the end
frame support pipes.
Visit www.ClearSpan.com for additional products and customer assistance.
3