ページを印刷するCLEARSPAN
END FRAME KIT
™
5
INSTALL DOOR PANELS
Gather the parts:
•
Door panels (#CG72119A & #CG72119B)
•
All door accessories
•
Square head screws (#FAS8)
•
90° Connectors (#104637)
•
Phillips head screws (#FAF25P)
View the diagrams to install the door panels.
1. Locate the upper door panel and position it in the door
opening of the frame. Verify that the side with the 90°
connectors is to the inside of the shelter.
NOTE: The door panels can be positioned to swing open from the left or the right. Remove and reattach hinges as
needed.
2. With the panel in the door opening, attach the hinges to the door jamb using FAS8 square head screws.
3. Locate the lower door panel and position the panel in the door opening and attach the hinges as described in the
previous step.
ATTENTION: To ensure proper door operation, a 1/4" gap must be maintained between the upper and lower
panels and between header at upper panel.
4. With both door panels secured in place, close each panel and attach door handles, door lock, and 2" turn button in
the desired location using FAF25P Phillips head screws.
ATTENTION: Locking hardware and
turn button are attached to the bottom
panel.
Steps 1-3
Step 4
12
Ground
Level
Drawings may show a different but similar model.
Maintain an even gap of approximately
1/4" across the bottom of the door and
between door panels.
Steps 1-3
Step 4
Door handles can
be positioned where
desired.
Revision date: 05.18.10