- ページ 13
パワードライバー Dixon Automatic Tool SKC-PTA-BE90のPDF 操作およびメンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Dixon Automatic Tool SKC-PTA-BE90 17 ページ。 Automatic industrial cordless brushless power torque screwdrivers
ページを印刷するScrew fastening process
4.Set up functions
Settings
1.
Auto learning
mode
P
+
S
2.
Connection to
wireless
controller
Up+Down
->SL->SC->At->RC->SP->HC->LC->Ht->LT-->END
(Complete process)
Step1: Step1: Press P+S simultaneously for 5 sec., screen
will be flashing and greed LED will be on.
Step2: Start to set up functions step by step until shows HC,
use actual workpiece and screw to set up HC. (max.
fastening no. of thread)
Step3: When setting completes, press S to save settings.
Settings will be saved after screen flash 2 times.
Set up this function to connect to wireless controller
(KL-WSCBSN)
1. Default set as not connected. Press Up+Down
simultaneously for 10 sec. to change connection status.
2. To disconnect, press Up+Down simultaneously for 10 sec.
to disconnect
Functions
Description
12
Remark
1. If no workpiece and
screw were not used
during HC setting. It
will auto save as 99.9
2. After HC settings
complete, HT and LT
will also be shown.