- ページ 2
温室キット ClearSpan R020B00000FのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。ClearSpan R020B00000F 5 ページ。 20' wide rafter kit with mounting feet
ページを印刷するSpecial Rafter Assembly Instructions
During the assembly of each rafter, position the UPPER end of each rafter segment—this is the end that does not
include the pre-punched purlin mounting holes—to the top of the rafter assembly. Consult the diagrams below and all
rafter diagrams throughout this manual before you begin.
Chevron
CFG030PINSS03
Upper End
Upper ends do not
include purlin mounting
holes and are positioned
at the top of the rafter
assembly and connected to
the chevron.
CORRECT ASSEMBLY
20' RAFTER
Correct position of rafter segment. Position the purlin
mounting hole as shown when connecting the rafter
segments during the rafter assembly steps.
Insert (above right) shows the incorrect position of
the rafter segment.
2
Important Information
Chevron
CFG030PINSS03
PURLIN MOUNTING HOLE
FOR THE LOWER PURLIN
INCORRECT POSITION
Lower end of each rafter segment
includes purlin mounting holes.
DO NOT CONNECT THE LOWER
END TO THE CHEVRON.
LOWER END OF
RAFTER SEGMENT
RAFTER SEGMENT
Revision date: 02.22.11