ページを印刷するDrag Box
Safety Tips
•
Please refrain from using the box on unstable ground and within close proximity to structures
due to increase in Earth Pressure.
•
Plan all excavations ahead of time to ensure that the correct lifting operations can be used.
•
Ensure that all personnel required to install this equipment are suitably trained and supervised
whilst assembly and installation is in progress.
•
Inspect all components, including lifting points, struts, clips and pins.
•
Boxes should never be left flying above the base of the excavation.
•
Leave 100mm of the box above ground level on the base/top box.
•
Refrain from bearing weight with the bucket in the middle of the panel during installation.
•
Only access the box via ladder access.
•
Never move the box whilst personnel are inside the excavation.
•
Do not use any un-supported part of the trench as access.
•
Top Boxes and extension panels are not to be removed before the top of the base box is above
ground level.
•
To minimise damage do not lift the box via the struts or laterally load them.
•
Attach Ladder Access and Guardrails before use.
•
Seek advice if you are in doubt.
7
www.altradgeneration.com