- ページ 12

防犯カメラ ClearView IPD-81AのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。ClearView IPD-81A 16 ページ。 Hd ir vandal proof wedge dome network camera

Note:

Long press the reset button for 5 to 10 seconds to realize device reset function.

Step 3

Fix the device on the installation surface.

1. Please take out the installation position map in the accessories bag, and then paste it on the

ceiling or the wall according to the outlet location, then dig four holes on the installation surface

according to the sign on the installation position map. Take out the expansion bolts from the

accessories bag and insert them into the installation holes and secure firmly.

2. Adjust the dome pedestal according to the top outlet or side outlet.



If you select top outlet, then it needs to dig a "cable exit hole" on the installation surface according

to the installation position map.



If you select side outlet, first it needs to remove the reserved gap on the enclosure, and then pull

the cable through the side outlet slot between the installation surface and pedestal.

3. Aim the screw fixing holes on the dome pedestal at the expansion bolt fixing hole on the

installation surface, then tighten four self-tapping screws into the expansion bolts and secure firmly,

and fix the dome on the installation surface.

Step 4

Adjust the monitoring direction of the device, which is shown in Figure 2-3.

First loosen the locking screw, the lens horizontal adjustment can be directly adjusted manually, as for

vertical adjustment, it first needs to take out the inner hex wrench in the accessories bag and insert it

into the wrench hole on the lens surface, finally rotate the inner hex wrench to adjust. Tighten the

locking screw after adjustment is completed.

Note:

The range of lens adjustment angle: horizontal rotation direction (-30°～+30°) ,vertical rotation

direction (0°～+80°), image rotation direction (0°～+360°).

Figure 2-2