- ページ 6

ネットワーク・ルーター Edgewater Networks 4562のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Edgewater Networks 4562 7 ページ。 Converged networking router

Step 3 − Plan Your Configuration

The EdgeMarc 4562 can be deployed as a gateway router in a network. It can also be deployed

in a network behind an existing firewall. Based on your deployment criteria, consult the following

documents for further configuration:

•

EdgeMarc 4500 Series Converged Networking Router Installation Guide

•

VoIP Operating System (VOS) for EdgeMarc User Manual

Although not recommended, the 4562 and IP phones can be installed behind an existing

enterprise firewall. In this instance the firewall will have to be configured to allow access to and

from the 4562's public IP address for the following ports:

Port Type

UDP

RTP

TCP

Telnet

FTP

MGCP

NTP

SIP

IP phones normally point to a local NTP server for their time reference. The NTP port 123

needs to be opened if your network does not have an NTP server.

Please Note: Traffic shaping for this configuration is only available if the enterprise data

devices are also installed behind the 4500.

Firewall Ports to Open

161 (SNMP) and 162 (SNMPTRAP)

1056 to 1255

SSH TCP 22 for remote management & TCP 80 for WAN

configuration-downloads

TCP 21 for stateful TCP-session control from 4500 to Edgewater

FTP server

2427, 2429, 2432, and 2727

123

5060 and 5075

Page 6 of 7