- ページ 7

自動車アクセサリー ClearView POWER SLIDEのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。ClearView POWER SLIDE 16 ページ。

Assembly Instructions

The Clearview Power Slide® should only be mounted to a solid, fixed, flat

timber/metal surface. Do not attempt to fit the Power Slide to an existing inbuilt

fridge slide, warranty on the Power Slide™ will be made void if attempted.

This guide is for fitting a Clearview Power Slide® to a vehicle drawer system. Some

assembly of the slide is required prior to installation, as it has been partially dismantled

for packaging and freight. Please remove any cargo barrier dividers or shelving over the

drawer system and ensure there are no tie down lugs under the proposed positioning of

the slide. Please also ensure the top of the mounting surface is flat and free from debris.

Unboxing

We recommend having an additional person to help with the handling of the box and

setting up of the Power Slide™.

Inspect the box for damage.

Use the side cutter to safely cut and remove straps securing the box and remove lid.

Locate the fixing kit within the packaging and set aside.

Gently remove the Power Slide™ safely from the box and place onto a sturdy bench/table.

Remove the cardboard infills and foam inserts.

clearviewaccessories.com.au