- ページ 6
フェンス＆ゲート diybook KG Garden Gate Closer GTS 120のPDF 取付方法をオンラインで閲覧またはダウンロードできます。diybook KG Garden Gate Closer GTS 120 7 ページ。 Garden door-closer
diybook KG Garden Gate Closer GTS 120 にも： 組立説明書 (7 ページ), 取り付け (9 ページ)
ページを印刷する
gardengatecloser.com
a diybook KG brand
Having measured the distance correctly, mark, centre-punch and then drill both holes for bracket 2 using a 4.2 mm drill.
Mount and tighten bracket 2 using the tapping screws enclosed.
Step 5: Insert and tighten the garden gate closer
For easier mounting, the garden gate closer is pre-loaded when delivered. For inserting the gate closer, open the gate
until the gate closer can be put into the respective holes without applying any force. The thicker end of the closer is to
be put into bracket 1 (near the wall). The slimmer end is being inserted into bracket 2 (on the gate).
Finally, the garden gate closer is fixed using the cap nuts. Therefore, screw on and tighten the cap nuts using the
locknuts. In this step the nuts should be tightened in such a fashion, so that the threaded rods are straightened and
stand in right angles to the mounting bracket.
Note: In most cases, the pre-loading security bolt loosens by itself during this procedure. In case that the bolt remains,
carefully move the gate just a few millimetres towards its opening direction!
diybook KG
Korneuburger Strasse 68-70/2
AT-2102 Bisamberg, AUSTRIA
UID-Nr: ATU67654415, DE313733795
FB-Nr: FN 387443 w
telephone: +43 2262 712 51
fax: +43 2262 712 51-77
email: [email protected]
website: https://gardengatecloser.com
page 6