- ページ 8
スイッチ Edgewater Networks 4200 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Edgewater Networks 4200 Series 8 ページ。 Converged network appliance
ページを印刷するMGCP
2427, 2429, 2432, and 2727
123
NTP
SIP
5060 and 5075
IP phones normally point to a local NTP server for their time reference. The NTP
port 123 needs to be opened if your network does not have an NTP server.
Please Note: Traffic shaping for this configuration is only available if the enterprise
data devices are also installed behind the 4200.
4200 Web Based GUI Configurations
The web page configurations for the various 4200 deployments are as follows. The two
darker-shaded rows in the table below indicate the minimum configuration required for
each deployment.
4200
GUI Configuration
Page
Network
VoIP/ALG
NAT
Firewall
DHCP
Traffic Shaper
Traffic Simulator
System
Please visit our website at
Edgewater Technical Assistance Center at 408.351.7255 for additional
information or assistance.
2730 San Tomas Expressway, Suite 200, Santa Clara, California 95051
Copyright© 2004, Edgewater Networks, Inc.
Suggested
4200
Deployment
infrastructure
Yes
Yes
Yes
Yes
Yes
Optional
Yes
Optional, but
recommended
Yes
Yes (but should be
disabled if DHCP server
already exists)
Yes
Yes
Only for
Only for testing
testing
As needed
As needed
www.edgewaternetworks.com
with existing
or contact the
All rights reserved.
4200
, behind an
existing firewall
Yes
Yes
Yes
Optional, but
recommended
Yes (but should be
disabled if DHCP server
already exists)
Optional (depends on
network topology)
Only for testing
As needed