ページを印刷するSETTING REMOTE CONTROL CHANNELS
Enter into setting codes status
Press [setting] button for 3 seconds till
the light on.
Set the current channel code
Press [Channel setting] button on the back of
transmitter till the light of the motor sparkles.
RESET/DELETE REMOTE CONTROL CHANNELS
Enter into setting codes status
Press [setting] button for 3 s till the light
switches on
CHANGE DIRECTION SETTING
Enter into setting codes status
Press [setting] button for 3 s till the light
switches on.
ATENTIONS
1. The setting limit and intermediate point will automatic be deleted when the user operates the change direction.
2. If the curtain cannot fully close of it opens/closes in the opposite direction, please proceed to change direction with
remote settings as detailed above.
ALTRAN SOLUTIONS SL
Ctra. Valencia-Ademuz, Km 21,9.
46181 · Benissanó · Valencia · SPAIN
Choose channels
Press [channel choose left] [channel choose
right] button to choose the desired channel.
Confirmation
Press [setting] button to again to confirm
operation. The remote channel is set.
Delete remote control channels
Press [setting] button again for 7 s till the
light switches off.
Change direction
Press (channel selection)
(stop) buttons at once.
Confirmation
and
Press [setting] button again to confirm
the operation.
Tel.: 00 34 96 113 61 53
Fax: 00 34 96 113 61 27
www.altransolutions.es
5