- ページ 11

バイクアクセサリー ClearWater Lights GlendaのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ClearWater Lights Glenda 12 ページ。 Led light kit for bmw k1600gt
ClearWater Lights Glenda にも：インストレーション・マニュアル (12 ページ), インストレーション・マニュアル (12 ページ), インストレーション・マニュアル (12 ページ), インストレーション・マニュアル (16 ページ)

Alignment / Using a Drip Loop

Aligning the Lights:

Ask an assistant to help you with this procedure. Make sure the bike is

on level ground and have an assistant sit on the bike. With a right angle

board or object, position the board on the floor and slide it up to the light.

The goal is to adjust the lights so that the light is level with the ground.

Passengers and luggage may alter the alignment of the light, so further

adjustments may be needed. You may find that a slight downward angle

(5 degrees) is helpful.

Using a Drip Loop:

• Though our lights are sealed for ultimate all weather use, sometimes

water sneaks by. To make sure this doesn't happen, we highly suggest

using a drip loop. When installing the wiring to your lights, use a drip

loop as shown below. This will keep water from dripping directly into the

light and instead fall off before it can reach the back of the body.

• To do this just leave a bit of extra wiring and let it hang below the light.

You could make a complete loop if you like, but just make sure the wire

hangs below the light as shown below.

No Drip Loop

Page 10

With Drip Loop

Page 11