- ページ 16

スパ・アクセサリー Clearwater Spas CLEAR A-400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clearwater Spas CLEAR A-400 20 ページ。

Perfect+PHOSfree can maintain. It is important to reduce/eliminate

the source of the phosphates for Pool Perfect+PHOSfree to

work properly. If possible, prevent runoff from gardens and lawns

from entering the spa. Remove leaves from the spa regularly and

promptly.

9. You may need to add a clarifier or flocculent if you see cloudy

water or fine particles in the water which the filter cannot catch. With

the pump turned off, the clarifier clumps fine particles together and

causes them sink to the bottom. When the particles have settled on

the bottom of the pool they are easily removed by vacuuming. This

is not a dangerous chemical and it is used in small quantities. Please

follow the directions on the product label.

Note: 'Stain and Scale' or sequestering products conflict with

CLEAR. If you use a stain and scale or other sequestering product, it will

remove the CLEAR minerals from the water and neutralize new minerals

for several weeks. Before adding a sequestering product, turn off the

CLEAR controller by unplugging it from the power source, or turning

down the 'Ion/Action' setting to 00 to preserve the life of the electrodes.

After three to five weeks, you can turn the controller back on. You will

need to ramp up the copper level to 0.2ppm to 0.6ppm again using the

method described above.

If you have iron or other contaminants in your source water, it can also

be treated using a filter that attaches to your garden hose.

16 | User Guide