- ページ 4

バイクアクセサリー AltRider Hemisphere SaddlebagのPDF 取り付けとお手入れ方法をオンラインで閲覧またはダウンロードできます。AltRider Hemisphere Saddlebag 7 ページ。

Hemisphere Saddlebag

The two Lower front attachment straps are intentionally left extra long for use

on some motorcycles that do not have an easy mounting frame tube or con-

nection point. On this particular bike, the trellis frame is a perfect mounting

point. You want this strap to be as short as possible so that the Saddlebag is as

tight as it can be on your bike. These straps are critical to a secure attachment

and should be checked frequently. You can trim any excess strap once you have

determined the correct position on your particular bike. Use the front straps to

create tension on the rear anchor now in place. This creates a tight, narrow, and

secure system.

IMPORTANT - Always make sure your straps are tidy and no excess strap is loose

or capable of becoming entangled in your chain or interfering with your boot

position on the bike.

TIP – On some bikes boots have been known to wear out straps on the lower

attachment points. Here we will commonly use a piece of tubing to cover the

strap so it does not wear out. This is a great fix for those who do not have a 2nd

option for the lower mounting points.

Most bikes will require our Heat Shield to defend the saddlebag from the

exhaust. Carefully inspect your correctly mounted Saddlebag to determine the

best location to mount your Heat Shield. All that is required is an air space or a

'stand off' to allow air to pass through between your bodywork and the exhaust

or muffler – thus preventing any damage to the bag and/or bikes fairings from

heat.

Installation & Care Instructions