- ページ 3
フロアマシン Edic Saturn 20DS3-Bk-SVのPDF オーナーズ/オペレーターズ・マニュアルをオンラインで閲覧またはダウンロードできます。Edic Saturn 20DS3-Bk-SV 13 ページ。 Low speed and dual speed floor machine
formed by an EDIC authorized service center.
•
Keep hair, loose clothing, fingers and all parts of
body away from openings and moving parts.
•
Use extra care when cleaning near stairs.
•
When servicing machine, use manufacturer's sup-
plied or approved replacement parts.
•
Do not wrap the cord too tightly when storing.
•
Work only in well lit areas.
•
This equipment is heavy. Use proper lifting tech-
niques when lifting heavy equipment.
PROPER LIFTING TECHNIQUES:
1.
3.
5.
1. Stand close to the load with your feet spread shoul-
der width apart. One foot should be slightly in front
of the other for balance
2. Squat down, bending at the knees (not your waist).
Tuck your chin while keeping your back as vertical as
possible
3. Get a firm grasp of the object before beginning the
lift.
4. Slowly begin straightening your legs, lifting slowly.
Never twist your body during this step.
2.
4.
5. Once the lift is complete, keep the object as close to
the body as possible. If the load's center of gravity
moves away from your body, there is a dramatic in-
crease in stress to the lumbar region of the back.
GROUNDING INSTRUCTIONS:
This piece of equipment must be grounded. Should an
electrical malfunction occur, grounding provides a path
of least resistance for electrical current- reducing the risk
of electric shock. This piece of equipment is furnished
with a cord that has a grounding conductor and ground-
ing plug. The grounded plug must only be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordi-
nances.
Fig. 1
WARNING:
Connecting the equipment to an improperly grounded
outlet can result in an increased risk of electric shock. A
qualified electrician should be consulted if you are un-
sure that the outlet is properly grounded. Do not modify
the plug provided with the equipment. If it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
This appliance is designed for use on a 120-volt circuit.
The grounding plug provided looks like the plug illus-
trated in Figure 1. Replace the plug if the grounding pin
is damaged or broken.
The Green (or Green/Yellow) wire in the cord is the
grounding wire. When replacing a plug, this wire must
be attached to the grounding pin only.
DO NOT use extension cords.
Servicing:
In the event that your SATURN requires service, please
contact EDIC at:
800-338-3342
or email [email protected]
Do not attempt repairs yourself. EDIC will assist you in
locating an indepedent service contractor.
3