- ページ 11

照明器具 DJ'SLIGHTING DJS-LED631のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DJ'SLIGHTING DJS-LED631 11 ページ。 36x10w zoom moving head

10. Maintenance and Cleaning

The following points have to be considered during the inspection:

1) All screws for installing the devices or parts of the device have to be tightly

connected and must not be corroded.

2) There must not be any deformations on the housing, color lenses, fixations and

installation spots (ceiling, suspension, trussing).

3）Mechanically moved parts must not show any traces of wearing and must not

rotate with unbalances.

4）The electric power supply cables must not show any damage, material fatigue or

sediments.

Further instructions depending on the installation spot and usage have to be

adhered by a skilled installer and any safety problems have to be removed.

In order to make the lights in good condition and extend the life time, we suggest a

regular cleaning to the lights.

1) Clean the inside and outside lens each week to avoid the weakneness of the

lights due to accumulation of dust.

2) Clean the fan each week.

3) A detailed electric check by approved electrical engineer each three month,

make sure that the circuit contacts are in good condition, prevent the poor

contact of circuit from overheating.

We recommend a frequent cleaning of the device. Please use a moist, lint- free

cloth. Never use alcohol or solvents.

There are no serviceable parts inside the device. Please refer to the instructions

under "Installation instructions".

Should you need any spare parts, please order genuine parts from your

local dealer.

-10-

http://www.djslighting.com/