- ページ 8

キッチン家電 Cleaver CDABU127のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cleaver CDABU127 16 ページ。 Dry ageing cabinets

5. Turning Your Cabinet On

Plug in and switch on the cabinet by pressing and holding the power button for

a few seconds.

If you are using the CLEAVER Dry Ageing Cabinet for the first time (or restarting

after prolonged period of disuse), it will require running for a couple of hours to

reach the temperature and humidity settings.

Important: If the unit is unplugged, power is lost, or turned off, wait 3 to 5

minutes before restarting the unit. The CLEAVER Dry Ageing Cabinet may not

start if you attempt to restart before this time delay.

Operating Noises

The CLEAVER Dry Ageing Cabinets operate using a compressor and fans to

achieve the desired temperature and humidity settings, this may produce the

following types of noises.

These noises are normal and may occur as follows:

•

Gurgling sound: caused by the refrigerant flowing through the appliance's

coils.

•

Cracking/popping sounds: resulting from the contraction and expansion

of the refrigerant gas used in the chilling process.

•

Fan operating sound.