- ページ 10
ボイスレコーダー EDIC-mini EM Tiny16 Plus SeriesのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。EDIC-mini EM Tiny16 Plus Series 17 ページ。
enables it to automatically adjust amplification according to the sound level. That makes
it possible to perfectly record very loud sounds and amplify silent ones. Choose
suitable for you AGC level from pre-installed:
amplification without AGC;
•
AGC1 – for recording in a quiet room;
•
AGC2 - for recording in a noisy room;
•
AGC3 - for recording from large distances;
•
AGC4 - for recording in a noisy large room;
•
AGC5 - for recording on a noisy street.
•
11. Timers
The recorder has two timers: Daily and Once. Timers enable recording to start
automatically, without user's control.
1. When setting Once Timer you need to specify the record's start and end time
and date. For example, «start 31.12.2013 23:00 stop 03.01.2014 10:00» - with
these settings your recorder will record from 23:00 on the 31st of December
2013 until 10:00 of January 3, 2014. However while configuring you should
take into account the capabilities of your recorder, i.e. whether it's free memory
is enough to perform the operation. To check this see «free memory « in
EMPlus and continuous operation time in Appendix 1.
2. When configuring Daily Timer you need to set record's start and end time.
For example «start 09:20 stop 13:05» - with these settings the recorder starts
recording every day at 9:20 and stops recording at 13:05. Recording will be
carried out as long as the recorder has free memory, enough charge and as
long as the timer is on.
3. You can use both timers simultaneously, but you should take into account that
timer's operation times must not overlap or intersect.
Timer recording by can be stopped by shifting the recorder's switch to ON, then
again to OFF position.
If timer is on, you don't have to enable recording
(don't forget to synchronize the recorder's time with the PC time).
using
switch