- ページ 2

計測機器 EDIC-mini Weeny A110のPDF 短い取扱説明書をオンラインで閲覧またはダウンロードできます。EDIC-mini Weeny A110 3 ページ。

For recorders with rechargeable batteries, first make sure the rechargeable battery is fully charged. Charge the battery if necessary by using

interface cable from the delivery set to connect the Recorder to the PC or power supply (e.g. of a smartphone) with output voltage 5V and a

standard USB output.

Charging process is accompanied by smooth lightening and attenuation of LED with an interval of 1 to 4 seconds, depending on the current

battery charge level. The shorter the interval, the fuller battery charge level is. With battery fully charged, this interval decreases to zero. Full

charging takes about 2.5 hours.

When charging is completed, disconnect the cable from the computer or charger.

Important!!! In order to avoid deep discharge and related damage of the rechargeable battery, the Recorder must not be stored with a discharged

battery and the device must be charged at least at least as specified in the table with parameters of the recorders. The failure of the battery due to

its deep discharge is a violation of the rules of operation.

To enable recording keep the START button pressed for about a second until the LED starts flashing. The LED flashes 3 times, and recording

starts. During recording the LED flashes in two series, the number of flashes indicating:

Number of flashes

To stop recording, keep the OFF button pressed until the LED lights continuously.

Recording also automatically stops when the battery is completely discharged or when the memory is full.

Recording can also be enabled with the start of charging process.

To playback, copy or delete the records made, connect the Recorder to the PC using interface cable. The Recorder is recognized in the PC as a

removable media (flash drive). The Recorder's drive contains records in wav format (to playback them use any media player) and a config.ini

configuration file with the settings of the Recorder.

Important!!! Creating or saving files (except for the settings file) on the Recorder's drive is unavailable.

For more detail on operating records, file name interpretation see full Operation Manual

To configure the Recorder's parameters, set its internal clock and password, open config.ini in any word processor and set the desired parameters.

The Recorder's clock synchronizes automatically with the PC as the configuration file is saved.

For more detail on the Recorder's configuration see full Operation Manual

In case of a malfunction of a rechargeable battery recorder, use any metal object (paper clip) to close the reset contacts (RESET on the case).

Recorder

Interface cable

Operation manual

Package box

Getting Started

Recording

Battery charge level (1st series)

80-100%

20-80%

2-20%

Record Playback

Setting the Recorder's Parameters

RESET

In Box:

Free memory capacity (2nd series)

75-100%

50-75%

25-50%

1-25%