- ページ 3

溶接システム Fitel FTS-B607-1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fitel FTS-B607-1 4 ページ。 Fiber cleaver

5. Blade recycling

The blade is a regular circle. Any point on the circle can cut more than 1000 times. Therefore, the area between

1 ~ 16 can be selected to cut. When all area is used up, the height of the blade can be adjusted to a higher

position, and it is possible to use it repeatedly.

Blade replacement

A. Use a wrench to loosen the blade locking screw and remove the locking screw and spacer.

B. Open the body lid and clamp the blade on both sides with tweezers carefully, gently lift the blade removed.

C. Clamp the new blade with tweezers and place the blade hole into the shaft. The rotating blade should be

set to the 1st position with a cotton swab.

D. Set the spacer and tighten the locking screw.

When using tweezers, the tweezers should not touch the blade edge, so as not to affect the cutting

performance.

4. Standard items

Main body

Single fiber adapter

Waste box

Hexagonal wrench

Operating manual

Carrying case

5. Contact

For sales and service information, contact your local representative,

2-6-4, OTEMACHI, CHIYODA-KU, TOKYO, 100-8322 JAPAN

Global Sales & Marketing

Furukawa Electric Co., Ltd.

1pc

or FURUKAWA ELECTRIC CO., LTD.

Darrin Newman

1-888-342-3743