- ページ 10

ドローン dji mavicのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dji mavic 13 ページ。 Intelligent flight battery
dji mavic にも：クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (14 ページ), よくある質問 (4 ページ), 安全マニュアル (20 ページ), ユーザーマニュアル (7 ページ)

Controlling flight with Virtual Joysticks on your mobile device via Wi-Fi

●

1. Power on the aircraft.

2. Press and hold the Function Button on the aircraft for four seconds until you hear

a double beep, switching to Wi-Fi control mode.

3. Launch the DJI GO 4 app and tap the icon in the top right corner of your screen.

Next, scan the Wi-Fi QR Code on the aircraft to start the connection.

4. Tap Auto Takeoff.

5. Now you can fly the aircraft with touch control via Virtual Joysticks.

Turn on your mobile device's Wi-Fi and enter the Wi-Fi password shown on the aircraft to connect to

●

the Mavic Air network if for any reason you cannot scan the QR code.

When using Wi-Fi in a wide open area with no Electro-Magnetic Interference, transmission distance

●

is approximately 262 ft (80 m) at an altitude of 164 ft (50 m).

Linking is required when switching back to Remote Control mode. The Wi-Fi frequency of your

●

mobile device can be set to 2.4 GHz or 5 GHz. Set your Wi-Fi to 5 GHz for less interference. Once

connected to the Mavic Air, you can change your Wi-Fi password or reset your Wi-Fi connection.

(Refer to the User Manual for more information)

In the DJI GO 4 App

●

Normal

TapFly

Watch the tutorial in the DJI GO 4 app or on the Official DJI website to learn more.

●

Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the

●

Home Point, you should guide it with the control sticks.

DJI GO 4

App

QuickShot

Tripod

Mavic_XXX

ActiveTrack

SmartCapture