- ページ 5

送信機 Arthur Grillo PI21のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Arthur Grillo PI21 8 ページ。 Pressure transmitter

Product description

The pressure transmitters PU21 or PI21 are used for the detection of relative pressure in

the range of 0 ... 1 bar to 0 ... 100 bar.

With the help of the ceramic pressure cell, the pressure is converted into an electrical

output signal.

The PU21 is designed in three-wire technology with an output signal of 0 ... 10V. With

an output signal of 4 ... 20mA, in two-wire technology, the PI21 is available. The electrical

connection is made in both versions via an angle plug connector according to DIN 43650,

the pressure connection has a G 1/2 "thread. Wetted parts are ceramic (AI2O3), Viton and

stainless steel.

Please note the following during assembly:

•

The screwing is done only with a suitable tool on the key surfaces,

•

The threads and seals are dirt-free and undamaged,

•

The process line is depressurized.

CAUTION

All dimensions in mm.

Material damage

Read the manual carefully before installation and operation

Only experienced stuff may connect the device and bring it into

operation.

Doc.-no: PU21_PI21_1

PRODUCT DESCRIPTION

issue: 01/2017