- ページ 4
ヘッドフォン EDIFIER HECATE EDF700006のPDF マニュアルをオンラインで閲覧またはダウンロードできます。EDIFIER HECATE EDF700006 10 ページ。 True wireless gaming earbuds
ページを印刷する
■ Power on/off
Automatically
•
Power on automatically when taken out of the charging case.
•
Power off automatically while placed in the charging case.
Manually
•
When powered off, respectively press and hold the touch zones of the left and right earbuds for around 3
seconds to power on;
•
When powered on, respectively press and hold the touch zones of the left and right earbuds for around 5
seconds to power off.
■ Bluetooth connection
Two earbuds mode
•
For initial use, take the earbuds out of the charging case and they will automatically power on (white lights
lit for around 2 seconds);
•
Then the left and right earbuds will auto-connect to each other, after interconnection is done, the earbuds
will enter Bluetooth pairing state (white and ice blue lights flashing alternately);
•
Set Bluetooth device to search for and connect to
indicators of the earbuds will flash once per 4 seconds.
One earbud mode
Please take the left or right earbud out of the charging case, and refer to the procedures mentioned in
"
earbuds mode
to pair with Bluetooth devices.
Re-connect automatically
•
Take the earbuds out of the charging case, they will auto-connect to the Bluetooth device connected last
time.
•
When the earbuds are disconnected from Bluetooth device for not in the effective distance, they can
auto-connect to the Bluetooth device if return to the effective distance within 5 minutes.
TWS pairing of the left and right earbuds
The left and right earbuds have finished TWS pairing before leaving factory. If the wireless connection fails to
resume, please follow the steps below to re-pair:
•
After powered on, simultaneously double click the left and right earbuds to start TWS pairing, and the
white lights of the earbuds will flash in a breathing pattern;
•
After TWS pairing is done, the earbuds will enter Bluetooth paring state (white and ice blue lights of the
earbuds flahsing alternately and rapidly).
•
Please refer to the procedures mentioned in
■ Restore to factory settings (
Restoring to factory settings will clear all pairing records of the earbuds.
•
When powered off, respectively press and hold the touch zone of the left and right earbuds for 8 seconds;
then double click the touch zone when the indicator is steady lit; the factory settings have been restored
when the light flashes twice.
•
Please refer to the procedures mentioned in "TWS pairing of the left and right earbuds" to complete TWS
pairing again.
"
HECATE GM5
"
Two earbuds mode
)
use with caution
"
, after pairing is successful, the
"
to pair with Bluetooth device again.
"
Two