- ページ 4

ドローン dji Phantom 4 RTKのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dji Phantom 4 RTK 10 ページ。 Remote controller
dji Phantom 4 RTK にも：免責事項および安全マニュアル (19 ページ), セットアップマニュアル (7 ページ), よくある質問マニュアル (17 ページ)

ページを印刷する

Using Phantom 4 RTK

1. Mount the Remote Controller Battery

The remote controller uses an easily removable interchangeable

Intelligent Battery for long-term operation.

Slide the battery compartment cover lock on the back of the

remote controller down to open the cover.

Insert the Intelligent Battery into the compartment and push it

to the top.

Close the cover.

To remove the Intelligent Battery, open the cover, press and hold the battery release button, then push the

●

battery downward.

2. Mount the Dongle and SIM Card

The Phantom 4 RTK remote controller can access the Internet using a 4G dongle with SIM card or Wi-Fi signal. For UK,

●

EU, ACUK, or ACEU versions, a Network RTK server can only be accessed using a 4G dongle with SIM card. For AU or

AFUS versions, using a 4G dongle with SIM card is recommended, but a WiFi signal can also be used. To conﬁrm the

version of your unit, please view the version code after the product name on the label on the product packaging. When

uploading or downloading system logs or operation data, using a Wi-Fi signal for Internet access is recommended.

Only use a DJI approved dongle.

●

The dongle supports various network standards. Use a SIM card that is compatible with the chosen mobile

●

network provider and select a mobile data plan according to the planned level of usage.

The dongle and SIM card are used to enable the remote controller to access to speciﬁc networks and platforms,

●

such as the DJI AG platform. Be sure to mount them correctly, or else network access will not be available.

Lift the dongle compartment cover

at the gap at its lower right corner,

then remove it.

* Test procedure: Press the remote controller power button once, then press again and hold to turn the remote

controller on. In the DJI GS RTK app tap

in the network chain are shown in green the dongle and SIM card are functioning properly.

3. Check the Battery Levels

Press once to check the battery level. Short press once, then long press and hold to turn on/off.

Dongle

Insert the dongle into the USB

port with the SIM card inserted

into the dongle and test. *

and select Network Diagnostics. If the statuses of all the devices

Low

High

Battery Release

Buttoon

Re-mount the cover. To secure the

cover, open the silicone protectors

on it, insert and tighten two Phillips

screws, then close the protectors.

Low

High