- ページ 5

ドローン dji Zenmuse H3-3DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji Zenmuse H3-3D 18 ページ。

ZENMUSE H3-3D User Manual

Accessories Pack- Camera Securing Bracket × 1

Camera mounting bracket.

Accessories Pack-Spare Screws × 1

M2.5x6.3: Used to mount your camera to the gimbal.

M2.5x5: Used to secure the gimbal to the damping unit.

M3x8, M3x6.5: Used to secure the gimbal to the aircraft.

Accessories Pack-Gimbal Video Signal Cable × 1

For connecting the gimbal controller unit to your wireless

video transmission module. Transmits the video signal.

Accessories Pack-CAN-Bus Cable × 1

Use CAN-Bus to connect the GCU to your flight control

system.

Accessories Pack-8-Pin Cable × 1

For connecting your Phantom 2 to the G8 port of the GCU.

Accessory Pack-USB Video Output Module

Connects to the USB port of your camera, for transmitting video.

Accessory Pack-Anti-interference Board x 1

Serves as the connecting board between the G8 port on

the gimbal and an 8-pin cable. This board is only available

with the H3-3D gimbal that does not come with a GCU unit

(namely, the H3-3D specifically designed for a Phantom 2).