- ページ 7

クワッドコプター dji INSPIRE 2のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dji INSPIRE 2 18 ページ。 Focus handwheelremote controller stand
dji INSPIRE 2 にも：ユーザーマニュアル (14 ページ), 整備・修理マニュアル (6 ページ), 免責事項および安全マニュアル (20 ページ), 安全マニュアル (4 ページ), マニュアル (2 ページ), ユーザーマニュアル (5 ページ), クイック・スタート・マニュアル (9 ページ)

ページを印刷する

7. Prepare the Aircraft

Insert the battery pair

Keep your hands away from the transformation mechanism when unfolding the landing gear.

Press the power button at least five times can transform the aircraft to Travel Mode again.

Make sure to press the battery remove button when removing the battery.

8. Mount the Gimbal and Camera

1 1

Press the gimbal

detach button to

remove the cover.

Always power off the aircraft before mounting or removing the gimbal. Be sure to remove the gimbal before transforming the aircraft

to Travel Mode.

Make sure to press down the gimbal detach button when rotating the gimbal lock to remove the gimbal and camera. The gimbal

lock should be fully rotated when removing the gimbal for the next installation.

9. Prepare for Takeoff

Pair the propellers and

motors with arrows of

the same color (red or

white).

Toggle the flight mode

switch to the safest P-mode.

Press the power button a

minimum of five times

Align the white and

Rotate the gimbal lock

red dots and insert the

to the locked position.

gimbal.

Press down the shrapnel and

rotate the propeller lock until

the arrows are aligned and

you hear a click.

Connect your mobile device.

Attach the propeller

onto the motor.

Make sure to press down the shrapnel before rotating the propeller lock.

Power on the remote controller

and the aircraft.

Unfold the landing gear to Landing

Mode and power on

Again, rotate the

propeller lock until

you hear a click.

DJI GO 4

App

Launch the

DJI GO 4 app and

tap GO FLY.