- ページ 5

クワッドコプター dji INSPIRE 2のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dji INSPIRE 2 9 ページ。 Focus handwheelremote controller stand
dji INSPIRE 2 にも：クイック・スタート・マニュアル (18 ページ), ユーザーマニュアル (14 ページ), 整備・修理マニュアル (6 ページ), 免責事項および安全マニュアル (20 ページ), 安全マニュアル (4 ページ), マニュアル (2 ページ), ユーザーマニュアル (5 ページ)

Using Inspire 2

1. Download the DJI GO 4 App

Search 'DJI GO 4' on the App Store or

Google Play and download the app to your

mobile device.

DJI GO 4 App

First-time activation requires your DJI account and internet connection.

Internet

DJI GO 4 app supports iOS 9 (or later) or Android 4.4 (or later).

3. Check the Battery Levels and Power on

Press once to check the

battery level.

Press once, again and

hold to turn on/off.

Only use battery slot A when using one battery to supply power.

4. Charge the Batteries

Press the release button and open the corresponding charging port cover.

Insert the Intelligent Flight Battery into the charging port to begin charging.

Charging Time: 1.5 hours*

The Intelligent Flight Battery must be fully charged before using it for the first time. Make sure to press the release button on the Charging

Hub's top when removing the fully charged battery.

Only use the official DJI charger and Charging Hub with your Intelligent Flight Battery and remote controller.

When charging is complete, the LED lights on the Intelligent Flight Battery will turn off, and the LED on the Charging Hub will show green.

Power off the remote controller before charging. When charging is complete, the LED lights on the remote controller will turn off.

The Charging Hub will sound a signal when the battery has been fully charged. The sound can be turned on or off by toggling the switch under the hub.

Press the button on the battery once to check the battery level.

Install the battery to the aircraft and power on. Once the battery temperature is lower than 15℃,it will auto heat to maintain a temperature

between 15-20℃.

Pairing batteries is recommended. This can be done inside DJI GO 4 app. Ensure each battery pair is charged and discharged

simultaneously to prolong their service life and for a better flight experience.

2. Watch the Tutorial Videos

Watch the tutorial videos at www.dji.com or in

the DJI GO 4 app.

High

Low

Charging Time: 3 hours*

Tutorial Videos

Low

Power Outlet

100-240V

* Provided charger

High