- ページ 5

クワッドコプター dji PHANTOM 3 PROFESSIONALのPDF 上級マニュアルをオンラインで閲覧またはダウンロードできます。dji PHANTOM 3 PROFESSIONAL 16 ページ。 Intelligent flight battery heater
dji PHANTOM 3 PROFESSIONAL にも：クイック・スタート・マニュアル (10 ページ), クイック・スタート・マニュアル (8 ページ), ユーザーマニュアル (3 ページ), クイック・スタート・マニュアル (4 ページ)

4. Check if there is an SD card in the drone (with enough free space). Each photo will take up

around 5-7 MB, so multiply that by the number of estimated photos in your flight plan to

calculate the required free space.

5. Mount the iPad on the remote controller (RC) and:

Check if it is secure so it can't fall

Attach the cable to the controller and the iPad

Turn the iPad on

Fold out the antennas and position them a little outward for the best reception

6. Turn on the RC by pressing the power button 1x short (1 second) and 1x long (2 seconds).

Green lights should appear and you will hear a sound that indicates that the device is turned

on.

7. Turn the drone on by following the same procedure as described for turning on the RC

(IMPORTANT: firstly turn on the iPad, then the RC and lastly the drone). The drone should

automatically connect to the RC.

If the small round light on top of the controller is RED, the drone has NOT

connected to the controller.

If the small round light on top of the controller is GREEN, the drone IS

CONNECTED to the controller. The white lights indicate how full the battery of

the RC is

Last updated March 27 2020

DJI Phantom 3 Advanced Manual

Page 5 of 16