ページを印刷するLinking
The Force Pro supports both wireless and wired connections. Linking is required when using a
wireless connection:
1. Go to the gimbal settings page on the Force Pro and go to "Settings->General->Linking".
2. Go to the gimbal settings page on the Ronin 2 and select "Linking".
3. Linking is successful when the Ronin 2 parameters are displayed on the screen of the Force Pro.
For the wired connection, connect the DC IN or DC OUT port on the Force Pro to the Ronin 2 using
a dedicated cable (sold separately).
Settings
These settings are based on using the Force Pro with the Ronin 2.
Main UI settings
1. GPS signal strength
: Shows the current GPS signal strength.
2. Mounting modes
: Handheld mode.
: Car mountmode.
: Aerial mode.
: Tripod mode.