- ページ 3

カメラアクセサリー dji MATRICE 200のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。dji MATRICE 200 14 ページ。
dji MATRICE 200 にも：クイック・スタート・マニュアル (11 ページ)

Remote Controller

The remote controller features DJI's LIGHTBRIDGE

While flying the aircraft, you have a live HD view directly within the DJI GO

responsive flying experience. Dual frequency support makes the HD video downlink more stable. In Dual Remote Controllers

Mode, each of the two remote controllers controls the aircraft and camera separately. Users can even operate these

mechanisms up to 328 feet (100 m) apart.*

The maximum run-time of the remote controller's LiPo battery is approx. four hours.*

1. Power Button

2. Return-to-Home (RTH) Button

3. Control Sticks

4. Status LED

5. Battery Level LEDs

6. Power Port

7. Mobile Device Holder

8. Antennas

9. Handle Bar

Stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft's elevation and heading. The right stick

controls the aircraft's forward, backward, and lateral movements. The gimbal dial controls tilting and panning of the camera. To adjust

the FPV camera, press and hold the C2 Button and rotate the control dial.

Left Stick

For more information about how to connect and use the remote controller, please refer to the user manual.

You can change the stick mode in the DJI GO 4 app.

* The remote controller can reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic interference, and at an

altitude of about 400 feet (120 meters).

For more information about the Dual Remote Controllers Mode, please refer to the user manual.

The maximum run-time is tested without supplying power to a smart device.

To comply with local regulations, the operation frequency of 5.8GHz is not available in some countries.

Folded

Right Stick

technology for a maximum transmission distance of up to 4.3 mi (7km).*

4 app on your paired device for a precise and

10. Control Dial (Gimbal/FPV)

11. Camera Settings Dial

12. Record Button

13. Flight Mode Switch

14. Shutter Button

15. Pause Button

16. Micro USB Port

17. CAN Bus (Extended Port)

18. HDMI A Port (for Video Output)

19. USB Port (for Mobile Device Connection)

20. C1 Button

21. C2 Button

16 17 18 19

Camera and Gimbal

FPV Camera