- ページ 5

カメラアクセサリー dji Ronin-SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji Ronin-S 10 ページ。 Tethered control handle
dji Ronin-S にも：クイック・スタート・マニュアル (17 ページ), クイック・スタート・マニュアル (13 ページ), 免責事項および安全マニュアル (10 ページ), ユーザーマニュアル (8 ページ), ユーザーマニュアル (7 ページ), ユーザーマニュアル (8 ページ)

Operation

M Button

Press once to switch user profile.

Press and hold to enter Sport mode.

Press six times to restore the current user profile and the Bluetooth password to

default settings.

Trigger

Press and hold to enter Lock mode.

Hold the M button to enter Sport Mode and while held down, press the trigger

twice to lock Sport Mode. Repeat the steps to exit Sport Mode.

Press twice to re-center the gimbal.

Press three times to turn the gimbal 180° so that the camera faces you.

Press four times and hold to begin joystick calibration. During calibration, push

and pull the joystick several times as far as it will go in all directions. Press four

times and hold the trigger again to complete calibration. If the LEDs blind red,

then the calibration has failed. If this happens, repeat the joystick calibration

process.

Press and hold the M button and trigger simultaneously for four seconds to

start auto tune.

Joystick

Push the joystick up or down to control the movement of the tilt axis and push it

left or right to control the movement of the pan axis. Go to the Control page in the

DJI Ronin app to adjust the parameters for the pan, tilt, and roll axes.

Camera Control Button

Press halfway to auto focus, as you would the shutter button on most DSLR

cameras.

Press once to start or stop recording.

Press and hold to take a photo.

For information on compatible cameras, refer to the Ronin-S Camera

Compatibility List on the official DJI website.

Sleep Button

Press once to enter sleep mode, press once again to exit from sleep mode.