- ページ 7

カメラアクセサリー dji Zenmuse H3-2DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji Zenmuse H3-2D 16 ページ。

dji Zenmuse H3-2D ユーザーマニュアル
STEP2. Mount the Camera to the Gimbal
1.
Mount the camera into the Camera Mounting Base of gimbal and fix the camera by the Camera Fixed
Mounting, shown as Fig.1.
2.
Plug the Camera Interface of gimbal into the System Port of camera, and make sure they are in good
contact, which are marked in Red shown as Fig.2.
3.
Tighten the M2.5x6.3 screw , shown as Fig.3.
4.
Please put you hand at the position in red mark shown as Fig.4, and then remove the camera from gimbal
with appropriate strength, as the Camera Interface is easily damaged.
STEP3. Double Check
Make sure the Lens of camera is pointing to the aircraft nose direction.
©2013 DJI Innovations. All Rights Reserved.
Fig.1
Fig.3
Fig.2
Fig.4
7