- ページ 10

カメラアクセサリー dji Zenmuse X5のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji Zenmuse X5 11 ページ。 For inspire 1 pro
dji Zenmuse X5 にも：ユーザーマニュアル (17 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (18 ページ), マニュアル (11 ページ)

Usage Condition Requirements

Do NOT use the Zenmuse X5 in severe weather conditions such as those

involving snow, rain, smog or tornados.

1. Filters must have a size of 46 mm and weigh 7-11 g, with those weighing

10-11 g performing the best. Outside this range, the filter will decrease

gimbal performance.

2. It is recommended to wrap the dust cover around the lens for aerial

applications.

3. It is important to tighten the Lens Lock after attaching the camera lens, as

this can reduce the vibrations of the lens when the aircraft is moving in flight.

Always loosen the Lens Lock before detaching the camera lens.

4. A filter can be installed in place of the Camera Balancing Ring. Remember to

use a filter that fulfills the weight requirement.

5. The Lens Hood can only be installed on the DJI MFT 15mm f/1.7 ASPH or

Panasonic Lumix G Leica DG Summilux 15mm f/1.7 ASPH. DO NOT install

the Lens Hood on the Olympus M.Zuiko Digital ED 12mm f/2.0.

6. Always set the camera lens to AF mode. The focus and aperture will be

controlled by the DJI GO app digitally.

7. Ensure the aircraft battery is fully charged when used with the Zenmuse

X5, or else the battery level may be displayed incorrectly. Fully charge the

battery before use if it has been stored for a long period. Immediately return

the aircraft to the Home Point if the Low Battery Level Warning is triggered.