- ページ 5
エクササイズバイク Fitness Quest Edge 386daのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Fitness Quest Edge 386da 19 ページ。 Dual action magnetic bike
ページを印刷する
ASSEMBLY
Occasionally our products contain components that are pre-lubricated at the factory. We recommend that
you protect flooring, or anything else the parts may contact, with newspaper or cloth.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.
FIGURE 1
NOTE: There are two FOOT TUBES. The REAR
FOOT TUBE has FOOT CAPS (6) on
each end and the FRONT FOOT TUBE
has WHEELS (7).
Step 1. Remove the two M8 x 1.25 x 60
CARRIAGE BOLTS (1), M8 WASHERS
(4) and M8 x 1.25 CAP NUTS (5) from
the REAR FOOT TUBE (2) with FOOT
CAPS (6).
Step 2. Attach FOOT TUBE (2) to rear of
FRAME (3) with hardware removed in
Step 1. Make sure to insert BOLTS
through "square holes" first.
5
M8 x 1.25
CAP
NUT
3
FRAME
7
WHEEL
FIGURE 2
IMPORTANT
7
WHEEL
4
M8
WASHER
2
FRONT
FOOT
TUBE
1
M8 x 1.25 x 60
CARRIAGE BOLT
1
M8 x 1.25 x 60
CARRIAGE BOLT
2
REAR
FOOT
6
TUBE
FOOT
CAP
FIGURE 1
FIGURE 2
Step 3. Remove the two M8 x 1.25 x 60
CARRIAGE BOLTS (1), M8 WASH-
ERS (4) and M8 x 1.25 CAP NUTS
(5) from the FRONT FOOT TUBE (2).
Step 4. Attach FOOT TUBE (2) to front of
FRAME (3) with hardware removed
in Step 3. Make sure to insert BOLTS
through "square holes" first.
5
6
FOOT
M8 x 1.25
CAP
4
3
M8
FRAME
WASHER
5
CAP
NUT