- ページ 9

リモコン dji RC Motion 2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji RC Motion 2 17 ページ。

1 Press and hold the power button on the aircraft until the battery level LEDs start to

blink in sequence.

2 Press and hold the power button on the motion controller until the controller beeps

continually and the battery level LEDs blink in sequence.

3 The motion controller stops beeping once linking is successful, and both the aircraft

and motion controller battery level LEDs turn solid and display the battery level.

• The aircraft can be controlled with only one remote control device during flight. If

your aircraft has been linked with multiple remote control devices, turn off other

control devices before flight.

Activation

FN Dial

Adjusting the camera parameters: press the dial to open the camera settings panel from

the FPV view of the goggles. Scroll the dial to navigate the settings menu or adjust the

parameter value, then press the dial to confirm the selection. Press and hold the dial to

exit the current menu.

When all devices are powered on and linked, connect

the USB-C port of the goggles to the mobile device

and run the DJI Fly app. The app will automatically

DJI Fly

identify the DJI RC Motion 2 and activate it in silent

App

mode.

Activate the device as soon as possible after

purchase to avoid affecting the after-sales service.

DJI RC Motion 2 User Manual

FN Dial

Shutter/Record Button