- ページ 4

バッテリーチャージャー dji IN2BSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。dji IN2BS 7 ページ。 Battery station for tb50

Using the Battery Station

Charging

1. Connect the Power Port of the Battery Station to a power outlet (100-240V, 50-60Hz) with the

AC power cable.

Power Outlet

2. Press the Power Button once to turn on the Battery Station.

3. Toggle the Status Switch to the left to enter the charging status.

4. Toggle the Option Switch to select Normal mode or Quick mode, then

press the Confirm Button.

5. Insert the TB50 Intelligent Batteries into the Battery Port to start

charging. Refer to the "Battery Status LED Description" section for more

information about Status LED patterns.

The eight Battery Ports are divided into four pairs: A, B, C and D.

Normal mode: Two Intelligent Flight Batteries in the same column (such as A1 and B1) will

charge simultaneously if their power level is similar. Otherwise, the battery station will charge

the battery with the lower power level first then charge both batteries when their power levels

become similar. Up to eight batteries can be charged simultaneously.

Quick mode: When two battery pairs are in the same column (such as pairs A and B), the pair

with the higher power level will charge first. When the pair is charged 90%, the station will

stop charging that pair and charge the other pair. When both pairs reach 90%, the station will

continue to charge until all the batteries are fully charged.

• Inserting already-paired batteries into the same pair of battery ports to charge is

recommended.

Battery Station

OPTION

Normal

Quick