- ページ 6
エクササイズバイク FitNord Racer 500のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。FitNord Racer 500 10 ページ。 Spinning bike
ページを印刷する
STEP 2:
1. Insert the L Shaped Knob (16) into the
front tube of the Main Frame (1). Tighten
clockwise. Then turn counter-clockwise
to loosen the L Shaped Knob (16) enough
to insert the Handlebar Post (25).
2. Insert the Handlebar Post (25) to the front
tube of Main Frame (1), adjust to the
proper height, and insert and tighten L
Shaped Knob (16) to secure.
3. Attach
the
Handlebar Post (25). Insert L Shaped
Knob (27) and Flat Washer (32) and
tighten to secure.
4. Attach the Seat (28) to the Seat Horizontal
Post (19). Tighten and secure with the
Spanner
NOTE: Before exercise, make sure the Seat
(28) is securely tightened to the Seat
Horizontal Post (19).
NOTE: ADJUSTING THE SEAT POST AND
THE SEAT HORIZONTAL POST
When the Seat Post (18) is at the lowest
setting, the handles on L Shaped Knobs (16)
may not have enough space to turn (See
drawing on left). If this happens, the handles
can be adjusted.
To adjust the handle, pull on the handle, turn
to a position that is not blocked, and release.
Repeat as needed. It may take several
adjustments to get the handle to a position
where it can be turned.
5
Handlebar
(26)
to
the