- ページ 5

I/Oシステム Artila RIO-2015PGのPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Artila RIO-2015PG 12 ページ。 Freertos programmable remote i/o module

1. Introduction

RIO-2015PG is a FreeRTOS Programmable Remote I/O Module. It features A/D, D/A and DIO in a

single unit and is C programmable with embedded web server. Software developer can use powerful

Atmel Studio to program to compile and debug their applications. Lots of example programs are

included for users to jump start their applications. A Manager utility is included to discover

RIO-2015PG and upgrade its application firmware.

1.1

Atmel SAM4E16E ARM Cortex-M4 120MHz

1MB on-chip flash and 128KB on-chip SRAM. 2MB flash and 128KB SRAM via spi expansion

One four wire RS-232 and one isolated RS-485 serial port

One 10/100Mbps Ethernet port

Four 16-bit analog input channels

Two 16-bit analog output channels

Two relay output and four isolated digital input

One Maxim 1-wire channel

One serial console port

Support lwIP and BSD socket library

Support tiny web server

Windows configuration utility included

Toolchain: Atmel Studio

1.2

CPU: Atmel SAM4E16E Cortex-M4 120MHz

Serial port:

Port1: RS-485 1500Vrms isolated

Port2: One full modem RS-232

Console: RS-232 three wires

Baud rate: 1200 to 921600bps

Flow control: None / Hardware / Xon_Xoff

Data bit: 5 to 8

Stop bit: 1 to 2

Protection: 15KV ESD

Ethernet:

10/100Mbps, RJ45

Protection: 1500V Magnetic isolation

Mass Storage:

microSD socket inside x 1

RIO-2015PG Hardware Guide