マザーボード Artila M-508のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Artila M-508 7 ページ。
ページを印刷するOverview
M-508 is a Linux ready Single Board Computer featuring four
serial ports, 10/100 Mbps Ethernet, USB port and SD socket for
flash disk expansion. The pre-install Linux OS and GNU tool
chain make M-508 ready for your application development.
Features
1.
ARM920T ARM Thumb Processor with 200MIPS at
180MHz, Memory Management Unit
2.
16-KByte Data Cache and 16-KByte Instruction Cache
3.
64MB SDRAM, 32MB Flash on board
4.
512KB non-volatile FRAM (M-508T only)
5.
One 10/100 Mbps Ethernet
6.
Two USB 2.0 full speed (12 Mbps) Host Ports
7.
Multimedia Card Interface for SD memory card
8.
Four RS-232/485 ports software selectable
9.
Port 4 also supports RS-422
10.
32 General Purpose DIO
11.
+5VDC power input
12.
Pre-installed Standard Linux 2.6.14 OS
13.
GNU tool chain available in Artila CD
Packing List
M-508 is shipped with following items
1.
M-508
2.
CB-F10M9-20 10-pin header to DB9 male cable x4
3.
Artila CD includes Tool Chain, Installation guide and
example programs
Optional Accessory
1.
CB-F9F9-150: DB9 Female serial console Cable
M-508 Quick Installation Guide
3.0 mm
3.0 mm
Screw: Φ 3 mm
M-508 Layout
JTAG
CN1
Power LED
Ready LED
LAN LED