- ページ 3
チャイルドシート Clek Q-TetherのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Clek Q-Tether 16 ページ。 For foonf and fllo

Checklist for Proper Use of Q-Tether
IMPORTANT: This is only a checklist – you must read and
understand all of the warnings and instructions provided with
your Clek car seat and in these instructions before installing or
using the Q-Tether.
Foonf or Fllo is installed rear-facing according to car seat
instruction manual.
Tether Hook is connected to designated tether anchor.
Q-
Tether Connector Strap is tightened so that Splitter Plate is
located on top of vehicle seat back.
Loops at end of Q-Tether are properly attached to Splitter Plate
and completely inside the slot.
Q-Tether adjuster is located on side of vehicle where child will
be loaded and unloaded.
Q-Tether is correctly routed through both Forward-Facing Belt
Lock-offs and both Lock-offs are closed.
Q-Tether Strap must not pass between Shoulder Harness Straps
and back of seat.
Q-tether webbing is tightened to be snug without lifting or
shifting position of car seat.