- ページ 13

コンピュータ・ハードウェア Artila Matrix-510のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Artila Matrix-510 17 ページ。 Linux arm9 industry box computer

Matrix-510 User Guide

4. Artila Utility Software

The introduction of Artila utility software as follow:

Update loader, kernel or root file system image. Also use update —FORMAT to format user disk.

Type update—help to find the command usage.

Update can only operated under supervisor mode (password: root).

Configure serial port setting. An example show as followed to configure port 1 as RS-485 interface

with baud rate 921600. Please note only port 1 support 9-bit data at RS-485.

lcdctl is used to control the LCD display. Use lcdctl to display user message, please prepare 2x18 text

message and save it as a file. Then use lcdctl filename to display the message on the LCD screen.

Use lcdctl —ip 0 to display the ip address of the network setting on the LCD screen. The parameter

time is the refresh rate in second and use lcdctl —cpu 0 to display the system loading information.

‧9‧