- ページ 3

インバーター CLEMAP Energy MonitorのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。CLEMAP Energy Monitor 10 ページ。

CLEMAP Energy Monitor | Installation manual

Specification

Power supply:

230V+/-10% 50/60Hz AC

Complies with EU standards:

- RE Directive 2014/53/EU

- LVD 2014/35/EU

- EMC 2014/30/EU

- RoHS2 2011/65/EU

CLEMAP Energy Monitor can measure the power consumption of a building or industrial facility. The

energy consumption can be displayed on a web portal and additional features can be unlocked to

contribute to efficient energy use.

CLEMAP Energy Monitor is installed in a circuit breaker box and must be connected to the power

supply lines between the meter and the building. It is possible to connect the sensor to a single phase

(L1), two phases (L1 and L2), or three phases (L1, L2, and L3).

Usually there are three input cables in a building: the phase conductors (L1=brown, L2=black and

L3=grey) and as output the neutral conductor (also called N=blue). The three current sensors must

be connected to all three incoming cables.

Radio protocol:

WiFi 802.11b/g/n

Frequency:

2400 - 2500 MHz

LAN:

RJ45 connector

Operational range (depending on local

construction):

- up to 50 m outdoors

- up to 30 m indoors

Dimensions (WxHxD):

105 x 86 x 59 mm

Electrical consumption:

<3W

Mechanical interface:

DIN Rail