- ページ 6

DJ機材 djpower 117545のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。djpower 117545 12 ページ。 Confetti canon

Before installation make sure that the mounting surface has the ability to carry the tenfold

point load of the own weight of the device.

Mount the device with the mounting-bracket to your trussing system using appropriate

clamp.

During overhead installation the device must be always secured by a safety rope which is

designed to hold the twelvefold weight of the device. Only safety ropes with quick-release

safety fastener elements may be used. Hang up the safety rope in the hole oft he mounting

bracket. Direct the rope over the truss or an appropriate fastening point. Hang up the end in

the fastening element and tie up the locking nut. A safety rope once exposed to failing load

or damaged may not be used furthermore.

The maximum drop exceed must not exceed 20cm.

Adjust the desired inclination angle via the mounting bracket and tighten the screw.