- ページ 9
DJ機材 djpower djv DC-2 CO2 CONFETTI FALLのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。djpower djv DC-2 CO2 CONFETTI FALL 10 ページ。 Pro stage effects
ページを印刷する5.5
M-3 Wired Controller Mode & Operation
Dial the switch of device to "ON", press the green button, it will present wonderful effects. If you want to
stop the device, just need to loosen the green button;
5.6
REPLACE A CO2 CYLINDER
•
Close the connected CO2 cylinder.
•
After close CO2 cylinder, power on and empty the CO2 in the hose.
•
Disconnect power.
•
Disconnect the CO2 hose from the CO2 bottle-to-hose connector on the CO2 cylinder.
•
Remove the CO2 bottle-to-hose connector from the cylinder.
•
Connect a CO2 bottle-to-hose connector to a new CO2 cylinder.
•
Connect the CO2 hose to the CO2 bottle- to-hose connector on the new CO2 cylinder.
•
Open the CO2 cylinder.
•
In case of multiple machines, connected in series: Repeat step as recommended for each machine.
6 TECHNICAL INFORMATION
6.1
Maintenance
•
To achieve the maximum service life of the machine, you must regularly clean the machine and test if
it is functioning correctly.
•
To prolong machine's life, clean the CO2 inlet and outlet at regular time to prevent dust attached.
•
The maximum of CO2 hose can be used 1 year and replace a new one after 1 year.
•
After using the filter for 3 months, take the filter element for a cleaning and reinstall and screw.
Do not replace parts yourself; always consult DJPOWER if necessary.
6.2
Storage
Store the machine at a dry and cool place.
DMX
OFF
ON
- 8 -