- ページ 7

圧着工具 Custom Crimp CC150MOB SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Custom Crimp CC150MOB Series 15 ページ。 Hose crimper with dial micrometer and 240 tons of crimping force has the capability to crimp up to 2" industrial hose

ページを印刷する

CC150MOB

General Production Hose Crimper

INITIAL SET UP

Caution:

Do not lift the machine by the crimper head.

Lift with a fork lift under the tank.

Mount the crimper on a sturdy surface. Workbench should be

able to support crimper weight of 400 lbs.

Check electrical circuit to be certain that it matches the crimper

requirements shown on the tag attached to the crimper cord.

DO NOT RUN CRIMPER ON AN EXTENSION CORD.

Check reservoir oil level with sight glass at the rear of the crimper.

The reservoir requires 6 gallons of ISO 46 hydraulic oil for a complete

fill. If necessary, oil can be drained from either of the two ports on the

rear of the reservoir.

Check to be certain that the motor rotates in the direction of the arrow

shown on the motor housing.

Damage to the pump can result if the motor does not rotate in the

correct direction.