- ページ 6

DJ機材 djpower djv DC-3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。djpower djv DC-3 8 ページ。 Confetti shot

4.3

DMX Linking

You can link the DC-1 to a DMX controller using a 3- or 5- pin DMX connection. If using other DMX-compatible products with this

product, you can control each individually with a single DMX controller. Instructions for connecting and configuring this product for

DMX operation are in the User Manual.

4.4

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

4.4.1

Rigging

DJPOWER recommends using the following general guidelines when mounting this product.

• Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming

purposes.

• Make sure that the structure or surface onto which you are mounting the product can support the product's weight (see the

Technical Specifications)..

5.1

Preparing for Operation

•

Connect the nozzle: Put the nozzle on the female connector and lock it firmly

•

Adjust the nozzle angle

•

Put the Confetti into the Nozzle

•

Use a outsourced booster pump or air compressor to pressurize the tank to 0.8MPA, not more than 0.8MPA

•

Plug the power cord into a grounded outlet. Before turning on the power, please reconfirm the voltage specifications.

5.2

On-device Control Panel

Button

<MENU>

▲

▼

<ENTER>

Function

Realize the cyclic conversion of the digital display main page, press the button to change a display page,

DC-3 has two setting pages

U p - a d j u s t i n g s e t t i n g s o f s u b - p a g e p a r a m e t e r s u n d e r e a c h d i s p l a y p a g e

Down-adjusting settings of sub-page parameters under each display page

After selecting the page, enter the sub-page or exit the sub-page

- 5 -