ページを印刷する1.4
Disclaimer
The information and specifications contained in this User Manual are subject to change
without notice. DJPOWER assumes no responsibility or liability for any errors or omissions
and reserves the right to revise or to create this manual at any time. Copyright © 2022
DJPOWER. All rights reserved.
1.5
Safety Notes
Please read the following Safety Notes carefully before working with the product. The notes
include important safety information about installation, usage, and maintenance.
1.5.1
Personal Safety
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Make sure that children, unauthorized people and animals do not obtain access to the
machine.
1.5.2
Mounting and Rigging
•
This product can be used indoors and outdoors！ To prevent risk of fire or shock, do not
expose the product to rain or moisture.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold
truck to warm humid ballroom) condensation may form on the internal electronics of the
product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton,
plastic, etc.).
•
Do not use in a confined space. Always install the product in a location with adequate
ventilation, at least 20 in (50 cm) from adjacent surfaces.
•
Be sure that no ventilation slots on the product's housing are blocked or clogged by dust.
If necessary, remove the dust.
1.5.3
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Never connect this product to a dimmer pack or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
2