ページを印刷するV-5 USER MANUAL
•
EU plug (EU market, etc.)
•
US plug (US market, etc.)
If the power input cord that came with your product has no plug, or if you need the change the plug, use the table below
to wire the new plug:
Connection
Wire (China)
AC Live
Brown
AC Neutral
Blue
AC Ground
Green/Yellow
4.3
Resetting the Breaker
This product is equipped with a resettable breaker. If the breaker trips, all sections of this product will lose power.
•
Remove the power cord from mains power.
•
Allow unit to cool for 15 minutes.
•
After 15 minutes, you may attempt to reset the breaker by pressing the button with your finger.
•
Plug the product's power cord into the power outlet and continue using as recommended.
4.4
DMX Linking
V-5 supports 3-pin or 5-pin connection to the DMX console, it can be connected to the same console with other DMX-
supported devices and be controlled separately. This manual covers the operation connection and configuration of DMX.
4.5
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
4.5.1
Orientation
For safety, it is recommended to install and operate this machine in a flat
location with adequate ventilation, configuration and maintenance space.
When the starlight effect is required to be tilted, the tilt direction is as shown
in the figure, and the tilt angle is not more than 15°.
4.5.2
Rigging
DJPOWER recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for maintenance and
programming purposes.
•
Make sure that the structure or surface onto which you are mounting the product can support the product's weight
(see the Technical Specifications).
•
When mounting the product on the floor, make sure that the product and cables are away from people and vehicles
Wire (Europe)
Brown
Blue
Green/Yellow
6
Wire (U.S.)
Black
White
Green/Yellow